Trifluoroacetic Acid
Fluoroacetates
Acetic Anhydrides
Chromatography, High Pressure Liquid
Hydrochloric Acid
Chromatography, Reverse-Phase
Spectrometry, Mass, Electrospray Ionization
Spectrophotometry, Ultraviolet
Molecular Structure
Mass Spectrometry
Solvents
Cyanogen Bromide
Indicators and Reagents
Peptides
Amino Acids
Chromophore-Assisted Light Inactivation
Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization
Peptide Fragments
Clinical isoflurane metabolism by cytochrome P450 2E1. (1/125)
BACKGROUND: Some evidence suggests that isoflurane metabolism to trifluoroacetic acid and inorganic fluoride by human liver microsomes in vitro is catalyzed by cytochrome P450 2E1 (CYP2E1). This investigation tested the hypothesis that P450 2E1 predominantly catalyzes human isoflurane metabolism in vivo. Disulfiram, which is converted in vivo to a selective inhibitor of P450 2E1, was used as a metabolic probe for P450 2E1. METHODS: Twenty-two elective surgery patients who provided institutionally-approved written informed consent were randomized to receive disulfiram (500 mg orally, N = 12) or nothing (controls, N = 10) the evening before surgery. All patients received a standard isoflurane anesthetic (1.5% end-tidal in oxygen) for 8 hr. Urine and plasma trifluoroacetic acid and fluoride concentrations were quantitated in samples obtained for 4 days postoperatively. RESULTS: Patient groups were similar with respect to age, weight, gender, duration of surgery, blood loss, and delivered isoflurane dose, measured by cumulative end-tidal isoflurane concentrations (9.7-10.2 MAC-hr). Postoperative urine excretion of trifluoroacetic acid (days 1-4) and fluoride (days 1-3) was significantly (P<0.05) diminished in disulfiram-treated patients. Cumulative 0-96 hr excretion of trifluoroacetic acid and fluoride in disulfiram-treated patients was 34+/-72 and 270+/-70 micromoles (mean +/- SD), respectively, compared to 440+/-360 and 1500+/-800 micromoles in controls (P<0.05 for both). Disulfiram also abolished the rise in plasma metabolite concentrations. CONCLUSIONS: Disulfiram, a selective inhibitor of human hepatic P450 2E1, prevented 80-90% of isoflurane metabolism. These results suggest that P450 2E1 is the predominant P450 isoform responsible for human clinical isoflurane metabolism in vivo. (+info)Identification of natural antigenic peptides of a human gastric signet ring cell carcinoma recognized by HLA-A31-restricted cytotoxic T lymphocytes. (2/125)
Peptides of human melanomas recognized by CD8+ CTLs have been identified, but the nature of those of nonmelanoma tumors remains to be elucidated. Previously, we established a gastric signet ring cell carcinoma HST-2 and HLA-A31 (A*31012)-restricted autologous CTL clone, TcHST-2. In the present study, we determined the natural antigenic peptides of HST-2 cells. The purified preparation of acid-extracted Ags was submitted to the peptide sequencer, and one peptide, designated F4.2 (Tyr-Ser-Trp-Met-Asp-Ile-Ser-Cys-Trp-Ile), appeared to be immunogenic. To confirm the antigenicity of F4.2 further, we constructed an expression minigene vector (pF4.2ss) coding adenovirus E3, a 19-kDa protein signal sequence plus F4.2. An introduction of pF4.2ss minigene to HST-2 and HLA-A31(+) allogeneic tumor cells clearly enhanced and induced the TcHST-2 reactivity, respectively. Furthermore, when synthetic peptides of F4.2 C-terminal-deleted peptides were pulsed to HST-2 cells, F4.2-9 (nonamers), but not F4.2-8 or F4.2-7 (octamer or heptamer, respectively), enhanced the reactivity of TcHST-2, suggesting that the N-terminal ninth Trp might be a T cell epitope. This was confirmed by lack of antigenicity when using synthetic substituted peptides as well as minigenes coding F4.2 variant peptides with Ala or Arg at the ninth position of F4.2. Meanwhile, it was indicated that the sixth position Ile was critically important for the binding to HLA-A31 molecules. Thus, our data indicate that F4.2 may work as an HLA-A31-restricted natural antigenic peptide recognized by CTLs. (+info)Trifluoroacetate, a contaminant in purified proteins, inhibits proliferation of osteoblasts and chondrocytes. (3/125)
Peptides purified by HPLC are often in the form of a trifluoroacetate (TFA) salt, because trifluoroacetic acid is used as a solvent in reversed-phase HPLC separation. However, the potential effects of this contaminant in culture systems have not been addressed previously. TFA (10(-8) to 10(-7) M) reduced cell numbers and thymidine incorporation into fetal rat osteoblast cultures after 24 h. Similar effects were found in cultures of articular chondrocytes and neonatal mouse calvariae, indicating that the effect is not specific to one cell type or to one species of origin. When the activities of the TFA and hydrochloride salts of amylin, amylin-(1-8), and calcitonin were compared in osteoblasts, cell proliferation was consistently less with the TFA salts of these peptides, resulting in failure to detect a proliferative effect or wrongly attributing an antiproliferative effect. This finding is likely to be relevant to all studies of purified peptides in concentrations above 10(-9) M in whatever cell or tissue type. Such peptides should be converted to a hydrochloride or biologically equivalent salt before assessment of their biological effects is undertaken. (+info)Quantitative screening for benzodiazepines in blood by dual-column gas chromatography and comparison of the results with urine immunoassay. (4/125)
A dual-column retention index method is described for quantitative gas chromatographic (GC) screening of 26 benzodiazepine drugs and metabolites in the blood using DB-5 and DB-17 capillary columns and electron capture detection. The method involves a one-step, small-scale liquid-liquid extraction with ethyl acetate and derivatization with N-methyl-N-(tert-butyldimethylsilyl)trifluoroacetamide with 1% tert-butyldimethylsilyl chloride. The results from the GC screening of 514 postmortem blood samples were compared to those obtained from urine immunoassay (Syva ETSplus with a 200-ng/mL cutoff). Both methods gave a negative result in 284 cases and a positive result in 149 cases. In 48 cases, urine was negative by immunoassay but blood was positive by GC. The opposite situation (blood negative, urine positive) was detected only in four cases. In 29 cases, an invalid result was obtained by urine by immunoassay: 26 blood samples of those cases were negative and three samples positive by GC. In postmortem forensic toxicology, the present GC method seems to be a good alternative to the common combination of urinary immunoassay followed by quantitative analysis of blood by chromatography. (+info)Tumor-specific CD4+ T lymphocytes from cancer patients are required for optimal induction of cytotoxic T cells against the autologous tumor. (5/125)
This study focuses on the specific CD4+ T cell requirement for optimal induction of cytotoxicity against MHC class II negative autologous tumors (AuTu) collected from patients with various types of cancer at advanced stages. CD4+ T cells were induced in cultures of cancer patients' malignant effusion-associated mononuclear cells with irradiated AuTu (mixed lymphocyte tumor cultures (MLTC)) in the presence of recombinant IL-2 and recombinant IL-7. Tumor-specific CD4+ T cells did not directly recognize the AuTu cells, but there was an MHC class II-restricted cross-priming by autologous dendritic cells (DCs), used as APC. CD8+ CTL, also induced during the MLTC, lysed specifically AuTu cells or DCs pulsed with AuTu peptide extracts (acid wash extracts (AWE)) in an MHC class I-restricted manner. Removal of CD4+ T cells or DCs from the MLTC drastically reduced the CD8+ CTL-mediated cytotoxic response against the AuTu. AWE-pulsed DCs preincubated with autologous CD4+ T cells were able, in the absence of CD4+ T cells, to stimulate CD8+ T cells to lyse autologous tumor targets. Such activated CD8+ T cells produced IL-2, IFN-gamma, TNF-alpha, and GM-CSF. The process of the activation of AWE-pulsed DCs by CD4+ T cells could be inhibited with anti-CD40 ligand mAb. Moreover, the role of CD4+ T cells in activating AWE-pulsed DCs was undertaken by anti-CD40 mAb. Our data demonstrate for the first time in patients with metastatic cancer the essential role of CD4+ Th cell-activated DCs for optimal CD8+ T cell-mediated killing of autologous tumors and provide the basis for the design of novel protocols in cellular adoptive immunotherapy of cancer, utilizing synthetic peptides capable of inducing T cell help in vivo. (+info)Analysis for carbamate insecticides and metabolites. (6/125)
Of the more conventional pesticidal chemicals, the carbamate insecticides pose some unique problems relative to residue analysis. Most of these compounds are unstable under conditions normally used for GLC analysis and require special attention if this technique is to apply to the carbamates. Moreover, the carbamates are commonly metabolized to products which are toxicologically significant and which must be included in any analytical considerations. These and other problems inherent in carbamate residue methodology are discussed in this report along with technique currently utilized or having potential as sound procedures for the analyses of carbamate insecticides. (+info)Urinary metabolites of halothane in man. (7/125)
The urinary metabolites of halothane (2-bromo-2-chloro-1,1,1-trifluoroethane) were investigated in five individuals given trace doses (25 muCi), and in three individuals given large doses (1 mCi) of radioactively labeled 14C-halothane. The latter were donor subjects for heart transplant operations. Separation of the nonvolatile urinary metabolites of halothane was accomplished by chemical extraction, electrophoresis, ion-exchange and high-pressure liquid chromatography, and gas chromatography. Identification of the individual metabolites was by nuclear magnetic resonance and mass spectrometry. Three major metabolites were identified: trifluoroacetic acid, N-trifluoroacetyl-2-aminoethanol, and N-acetyl-S-(2-bromo-2-chloro-1,1-difluoroethyl)-L-cysteine. Smaller unidentified radioactive peaks were also found. The presence of both ethanolamide and cysteine conjugates of halothane is of concern. These urinary products imply the presence of reactive intermediates. The conjugation of such intermediates to proteins and phospholipids may give rise to the high-molecular-weight covalently bound metabolites demonstrated to be present in the liver following halothane anesthesia. Elucidation of the structures of the urinary metabolites provides information important to an understanding of halothane metabolism and its potential hepatotoxicity. (+info)Acid mediated hydrolysis of blueberry anthocyanins. (8/125)
Acid mediated hydrolysis of anthocyanins was studied using capillary zone electrophoresis (CZE). A commercially available wild blueberry (Bilberry) extract was dissolved in different concentrations of TFA (0.1, 1, 3, 9%), then was subjected to thermodecomposition reaction at 95 degrees C. After the reaction, the samples were analyzed by CZE. The hydrolysis rate of each anthocyanin and the formation of the aglycon were determined by the change in the peak pattern of the anthocyanins in the electropherogram. Each anthocyanin peak decreased time dependently in a first order kinetic fashion. It was revealed that the hydrolysis rate of each anthocyanin was determined primarily by the type of conjugated sugar and not by the aglycon structure. The rate constant of anthocyanin hydrolysis was in the following order, arabinoside>galactoside>glucoside without regard to the aglycon structure. The kinetic behavior of this anthocyanin hydrolysis together with the CZE mobility allowed us to identify an unknown CZE peak as delphinidin 3-O-beta-arabinoside. At low TFA concentration, significant decomposition of the anthocyanidin nucleus occurred, but the glycoside hydrolysis predominated at high TFA concentration. It was further revealed that the aglycon released reacted successively to form polymeric products at higher TFA conditions. (+info)Trifluoroacetic acid (TFA) is not typically considered a medical term, but rather a chemical one. However, it does have relevance to the medical field in certain contexts, such as in laboratory settings or pharmaceutical manufacturing. Here's a definition of TFA:
Trifluoroacetic acid (C2HF3O2) is an inorganic compound that is a colorless liquid at room temperature. It has a strong, pungent odor and is highly corrosive. In the chemical industry, it is commonly used as a reagent or solvent due to its ability to dissolve a wide range of organic compounds.
In the medical field, TFA may be encountered in laboratory settings where it can be used for various purposes such as peptide synthesis, chromatography, and other chemical reactions. It is also sometimes used as an ingredient in certain pharmaceutical formulations, although its use is generally limited due to its potential toxicity.
It's worth noting that TFA is not a medication or drug, but rather a chemical compound with various industrial and laboratory applications.
Fluoroacetates are organic compounds that contain a fluorine atom and an acetic acid group. The most well-known and notorious compound in this family is sodium fluoroacetate, also known as 1080 or compound 1080, which is a potent metabolic poison. It works by interfering with the citric acid cycle, a critical process that generates energy in cells. Specifically, fluoroacetates are converted into fluorocitrate, which inhibits an enzyme called aconitase, leading to disruption of cellular metabolism and ultimately cell death.
Fluoroacetates have been used as rodenticides and pesticides, but their use is highly regulated due to their high toxicity to non-target species, including humans. Exposure to fluoroacetates can cause a range of symptoms, including nausea, vomiting, seizures, and cardiac arrest, and can be fatal if not treated promptly.
Acetic anhydride is a chemical compound with the formula (CH3CO)2O. It is a colorless liquid that is used as a reagent in organic synthesis, particularly in the production of cellulose acetate and other acetate esters. Acetic anhydride is also an important intermediate in the synthesis of certain pharmaceuticals and dyes.
In medical terminology, acetic anhydride is not typically used as a diagnostic or therapeutic agent. However, it can be used in laboratory settings to synthesize compounds that may have medical applications. For example, acetic anhydride has been used to produce certain antiviral drugs and antibiotics.
It is important to note that acetic anhydride can be harmful or fatal if swallowed, inhaled, or absorbed through the skin. It can cause burns and eye damage, and may be harmful to the respiratory system if inhaled. Therefore, it should be handled with care and used only in well-ventilated areas with appropriate personal protective equipment.
High-performance liquid chromatography (HPLC) is a type of chromatography that separates and analyzes compounds based on their interactions with a stationary phase and a mobile phase under high pressure. The mobile phase, which can be a gas or liquid, carries the sample mixture through a column containing the stationary phase.
In HPLC, the mobile phase is a liquid, and it is pumped through the column at high pressures (up to several hundred atmospheres) to achieve faster separation times and better resolution than other types of liquid chromatography. The stationary phase can be a solid or a liquid supported on a solid, and it interacts differently with each component in the sample mixture, causing them to separate as they travel through the column.
HPLC is widely used in analytical chemistry, pharmaceuticals, biotechnology, and other fields to separate, identify, and quantify compounds present in complex mixtures. It can be used to analyze a wide range of substances, including drugs, hormones, vitamins, pigments, flavors, and pollutants. HPLC is also used in the preparation of pure samples for further study or use.
Hydrochloric acid, also known as muriatic acid, is not a substance that is typically found within the human body. It is a strong mineral acid with the chemical formula HCl. In a medical context, it might be mentioned in relation to gastric acid, which helps digest food in the stomach. Gastric acid is composed of hydrochloric acid, potassium chloride and sodium chloride dissolved in water. The pH of hydrochloric acid is very low (1-2) due to its high concentration of H+ ions, making it a strong acid. However, it's important to note that the term 'hydrochloric acid' does not directly refer to a component of human bodily fluids or tissues.
Reverse-phase chromatography is a type of liquid chromatography that is commonly used in analytical chemistry and biochemistry to separate, identify, and purify complex mixtures of chemicals or biological molecules. In this technique, the stationary phase is a nonpolar solid, such as octadecyl silica (ODS) or C18, which is coated with a polar solvent, while the mobile phase is a nonpolar solvent, such as methanol or acetonitrile.
The term "reverse-phase" refers to the fact that the polarity of the stationary and mobile phases is reversed compared to normal-phase chromatography. In normal-phase chromatography, the stationary phase is polar and the mobile phase is nonpolar, which results in the separation of analytes based on their polarity. However, in reverse-phase chromatography, the stationary phase is nonpolar and the mobile phase is polar, which means that the separation of analytes is based on their hydrophobicity or hydrophilicity.
In reverse-phase chromatography, hydrophobic molecules elute more slowly than hydrophilic molecules because they have a stronger affinity for the nonpolar stationary phase. The retention time of an analyte can be adjusted by changing the composition of the mobile phase or the pH of the solution. This technique is widely used in the analysis of drugs, metabolites, peptides, proteins, and other biological molecules.
Mass spectrometry with electrospray ionization (ESI-MS) is an analytical technique used to identify and quantify chemical species in a sample based on the mass-to-charge ratio of charged particles. In ESI-MS, analytes are ionized through the use of an electrospray, where a liquid sample is introduced through a metal capillary needle at high voltage, creating an aerosol of charged droplets. As the solvent evaporates, the analyte molecules become charged and can be directed into a mass spectrometer for analysis.
ESI-MS is particularly useful for the analysis of large biomolecules such as proteins, peptides, and nucleic acids, due to its ability to gently ionize these species without fragmentation. The technique provides information about the molecular weight and charge state of the analytes, which can be used to infer their identity and structure. Additionally, ESI-MS can be interfaced with separation techniques such as liquid chromatography (LC) for further purification and characterization of complex samples.
Spectrophotometry, Ultraviolet (UV-Vis) is a type of spectrophotometry that measures how much ultraviolet (UV) and visible light is absorbed or transmitted by a sample. It uses a device called a spectrophotometer to measure the intensity of light at different wavelengths as it passes through a sample. The resulting data can be used to determine the concentration of specific components within the sample, identify unknown substances, or evaluate the physical and chemical properties of materials.
UV-Vis spectroscopy is widely used in various fields such as chemistry, biology, pharmaceuticals, and environmental science. It can detect a wide range of substances including organic compounds, metal ions, proteins, nucleic acids, and dyes. The technique is non-destructive, meaning that the sample remains unchanged after the measurement.
In UV-Vis spectroscopy, the sample is placed in a cuvette or other container, and light from a source is directed through it. The light then passes through a monochromator, which separates it into its component wavelengths. The monochromatic light is then directed through the sample, and the intensity of the transmitted or absorbed light is measured by a detector.
The resulting absorption spectrum can provide information about the concentration and identity of the components in the sample. For example, if a compound has a known absorption maximum at a specific wavelength, its concentration can be determined by measuring the absorbance at that wavelength and comparing it to a standard curve.
Overall, UV-Vis spectrophotometry is a versatile and powerful analytical technique for quantitative and qualitative analysis of various samples in different fields.
Molecular structure, in the context of biochemistry and molecular biology, refers to the arrangement and organization of atoms and chemical bonds within a molecule. It describes the three-dimensional layout of the constituent elements, including their spatial relationships, bond lengths, and angles. Understanding molecular structure is crucial for elucidating the functions and reactivities of biological macromolecules such as proteins, nucleic acids, lipids, and carbohydrates. Various experimental techniques, like X-ray crystallography, nuclear magnetic resonance (NMR) spectroscopy, and cryo-electron microscopy (cryo-EM), are employed to determine molecular structures at atomic resolution, providing valuable insights into their biological roles and potential therapeutic targets.
Mass spectrometry (MS) is an analytical technique used to identify and quantify the chemical components of a mixture or compound. It works by ionizing the sample, generating charged molecules or fragments, and then measuring their mass-to-charge ratio in a vacuum. The resulting mass spectrum provides information about the molecular weight and structure of the analytes, allowing for identification and characterization.
In simpler terms, mass spectrometry is a method used to determine what chemicals are present in a sample and in what quantities, by converting the chemicals into ions, measuring their masses, and generating a spectrum that shows the relative abundances of each ion type.
Solvents, in a medical context, are substances that are capable of dissolving or dispersing other materials, often used in the preparation of medications and solutions. They are commonly organic chemicals that can liquefy various substances, making it possible to administer them in different forms, such as oral solutions, topical creams, or injectable drugs.
However, it is essential to recognize that solvents may pose health risks if mishandled or misused, particularly when they contain volatile organic compounds (VOCs). Prolonged exposure to these VOCs can lead to adverse health effects, including respiratory issues, neurological damage, and even cancer. Therefore, it is crucial to handle solvents with care and follow safety guidelines to minimize potential health hazards.
Cyanogen bromide is a solid compound with the chemical formula (CN)Br. It is a highly reactive and toxic substance that is used in research and industrial settings for various purposes, such as the production of certain types of resins and gels. Cyanogen bromide is an alkyl halide, which means it contains a bromine atom bonded to a carbon atom that is also bonded to a cyano group (a nitrogen atom bonded to a carbon atom with a triple bond).
Cyanogen bromide is classified as a class B poison, which means it can cause harm or death if swallowed, inhaled, or absorbed through the skin. It can cause irritation and burns to the eyes, skin, and respiratory tract, and prolonged exposure can lead to more serious health effects, such as damage to the nervous system and kidneys. Therefore, it is important to handle cyanogen bromide with care and to use appropriate safety precautions when working with it.
Indicators and reagents are terms commonly used in the field of clinical chemistry and laboratory medicine. Here are their definitions:
1. Indicator: An indicator is a substance that changes its color or other physical properties in response to a chemical change, such as a change in pH, oxidation-reduction potential, or the presence of a particular ion or molecule. Indicators are often used in laboratory tests to monitor or signal the progress of a reaction or to indicate the end point of a titration. A familiar example is the use of phenolphthalein as a pH indicator in acid-base titrations, which turns pink in basic solutions and colorless in acidic solutions.
2. Reagent: A reagent is a substance that is added to a system (such as a sample or a reaction mixture) to bring about a chemical reaction, test for the presence or absence of a particular component, or measure the concentration of a specific analyte. Reagents are typically chemicals with well-defined and consistent properties, allowing them to be used reliably in analytical procedures. Examples of reagents include enzymes, antibodies, dyes, metal ions, and organic compounds. In laboratory settings, reagents are often prepared and standardized according to strict protocols to ensure their quality and performance in diagnostic tests and research applications.
Liquid chromatography (LC) is a type of chromatography technique used to separate, identify, and quantify the components in a mixture. In this method, the sample mixture is dissolved in a liquid solvent (the mobile phase) and then passed through a stationary phase, which can be a solid or a liquid that is held in place by a solid support.
The components of the mixture interact differently with the stationary phase and the mobile phase, causing them to separate as they move through the system. The separated components are then detected and measured using various detection techniques, such as ultraviolet (UV) absorbance or mass spectrometry.
Liquid chromatography is widely used in many areas of science and medicine, including drug development, environmental analysis, food safety testing, and clinical diagnostics. It can be used to separate and analyze a wide range of compounds, from small molecules like drugs and metabolites to large biomolecules like proteins and nucleic acids.
Peptides are short chains of amino acid residues linked by covalent bonds, known as peptide bonds. They are formed when two or more amino acids are joined together through a condensation reaction, which results in the elimination of a water molecule and the formation of an amide bond between the carboxyl group of one amino acid and the amino group of another.
Peptides can vary in length from two to about fifty amino acids, and they are often classified based on their size. For example, dipeptides contain two amino acids, tripeptides contain three, and so on. Oligopeptides typically contain up to ten amino acids, while polypeptides can contain dozens or even hundreds of amino acids.
Peptides play many important roles in the body, including serving as hormones, neurotransmitters, enzymes, and antibiotics. They are also used in medical research and therapeutic applications, such as drug delivery and tissue engineering.
Amino acids are organic compounds that serve as the building blocks of proteins. They consist of a central carbon atom, also known as the alpha carbon, which is bonded to an amino group (-NH2), a carboxyl group (-COOH), a hydrogen atom (H), and a variable side chain (R group). The R group can be composed of various combinations of atoms such as hydrogen, oxygen, sulfur, nitrogen, and carbon, which determine the unique properties of each amino acid.
There are 20 standard amino acids that are encoded by the genetic code and incorporated into proteins during translation. These include:
1. Alanine (Ala)
2. Arginine (Arg)
3. Asparagine (Asn)
4. Aspartic acid (Asp)
5. Cysteine (Cys)
6. Glutamine (Gln)
7. Glutamic acid (Glu)
8. Glycine (Gly)
9. Histidine (His)
10. Isoleucine (Ile)
11. Leucine (Leu)
12. Lysine (Lys)
13. Methionine (Met)
14. Phenylalanine (Phe)
15. Proline (Pro)
16. Serine (Ser)
17. Threonine (Thr)
18. Tryptophan (Trp)
19. Tyrosine (Tyr)
20. Valine (Val)
Additionally, there are several non-standard or modified amino acids that can be incorporated into proteins through post-translational modifications, such as hydroxylation, methylation, and phosphorylation. These modifications expand the functional diversity of proteins and play crucial roles in various cellular processes.
Amino acids are essential for numerous biological functions, including protein synthesis, enzyme catalysis, neurotransmitter production, energy metabolism, and immune response regulation. Some amino acids can be synthesized by the human body (non-essential), while others must be obtained through dietary sources (essential).
Chromophore-assisted light inactivation (CALI) is a photodynamic process that involves the use of a chromophore, which is a light-absorbing molecule, to specifically target and inactivate proteins or other cellular components. This technique is often used in research settings as a way to selectively eliminate specific cell populations or disrupt specific cellular processes with high spatial and temporal precision.
In CALI, the chromophore is typically linked to an antibody or other targeting molecule that specifically recognizes and binds to the protein or cellular component of interest. When the chromophore absorbs light at a specific wavelength, it undergoes a chemical reaction that generates reactive oxygen species (ROS), such as singlet oxygen or free radicals. These ROS then interact with and damage the nearby proteins or other cellular components, leading to their inactivation or destruction.
The key advantage of CALI is its ability to selectively target specific proteins or cellular components with high precision, without affecting surrounding cells or structures. This makes it a valuable tool for studying the functions of individual proteins and signaling pathways in complex biological systems. However, it is important to note that CALI can also cause non-specific damage to nearby cellular components if the chromophore is not carefully targeted or if the light dose is too high. Therefore, careful optimization and control experiments are essential for ensuring the specificity and effectiveness of CALI in any given application.
Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry (MALDI-MS) is a type of mass spectrometry that is used to analyze large biomolecules such as proteins and peptides. In this technique, the sample is mixed with a matrix compound, which absorbs laser energy and helps to vaporize and ionize the analyte molecules.
The matrix-analyte mixture is then placed on a target plate and hit with a laser beam, causing the matrix and analyte molecules to desorb from the plate and become ionized. The ions are then accelerated through an electric field and into a mass analyzer, which separates them based on their mass-to-charge ratio.
The separated ions are then detected and recorded as a mass spectrum, which can be used to identify and quantify the analyte molecules present in the sample. MALDI-MS is particularly useful for the analysis of complex biological samples, such as tissue extracts or biological fluids, because it allows for the detection and identification of individual components within those mixtures.
A peptide fragment is a short chain of amino acids that is derived from a larger peptide or protein through various biological or chemical processes. These fragments can result from the natural breakdown of proteins in the body during regular physiological processes, such as digestion, or they can be produced experimentally in a laboratory setting for research or therapeutic purposes.
Peptide fragments are often used in research to map the structure and function of larger peptides and proteins, as well as to study their interactions with other molecules. In some cases, peptide fragments may also have biological activity of their own and can be developed into drugs or diagnostic tools. For example, certain peptide fragments derived from hormones or neurotransmitters may bind to receptors in the body and mimic or block the effects of the full-length molecule.
An amino acid sequence is the specific order of amino acids in a protein or peptide molecule, formed by the linking of the amino group (-NH2) of one amino acid to the carboxyl group (-COOH) of another amino acid through a peptide bond. The sequence is determined by the genetic code and is unique to each type of protein or peptide. It plays a crucial role in determining the three-dimensional structure and function of proteins.